The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible.There is no match for power and performance for tubular stainless steel manifolds. J2 Engineering’s Tubular Manifolds are made up of runners coming from each cylinder, meeting up at a collector. Tubular manifolds yield a higher efficiency rate, as each runner is generally the same circumference. This tubular manifold furthers the even exhaust flow using “equal length” runners. Equal length tubular manifolds are the most efficient design, which ensures equivalent air flow rate smoothly from each cylinder. This allows for a much smoother flow of exhaust gas to the turbo. Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.

ACURA
MORE INFO APPLICATION PART NUMBER MSRP
| B-Series – T3 Flange – 35/38MM WG – Ram Horn | J2-TM-001-NP | n/a
| D-Series – T3 Flange – 35/38mm WG – Ram Horn | J2-TM-002-NP | n/a
| B-Series – T4 Flange – 3.5″ V-Band WG – Top Mount – W/ Downpipe | J2-TM-003-NP | n/a
| B-Series – T3 Flange – 35/38mm WG | J2-TM-004 | n/a
| B-Series – T3 Flange – 60mm WG – Top Mount | J2-TM-007-NP | n/a
HONDA
MORE INFO APPLICATION PART NUMBER MSRP
| B-Series – T3 Flange – 35/38MM WG – Ram Horn | J2-TM-001-NP | n/a
| D-Series – T3 Flange – 35/38mm WG – Ram Horn | J2-TM-002-NP | n/a
| B-Series – T4 Flange – 3.5″ V-Band WG – Top Mount – W/ Downpipe | J2-TM-003-NP | n/a
| B-Series – T3 Flange – 35/38mm WG | J2-TM-004 | n/a
| B-Series – T3 Flange – 60mm WG – Top Mount | J2-TM-007-NP | n/a
MAZDA
MORE INFO APPLICATION PART NUMBER MSRP
| RX-7 FD3S 13B – T4 Flange – 46mm WG 92-98 | J2-TM-005-NP | n/a
| RX-7 FC3S 13B – T4 Flange – 46mm WG | J2-TM-006/td>

| n/a

J2 Engineering products are covered under a limited lifetime warranty. The warranty covers parts that become non-functional due to a manufacturer related defect. Products that are worn due to heavy race and off-road use is immediately void of warranty.

When submitting claims, a valid original receipt is required from an authorized dealer. We cannot guarantee the authenticity of the product if this is not provided to us. J2 requires you to be responsible for all transportation fees needed to send back all approved parts. All warranties are subject to review and cannot guarantee that all claims are warranted for. Injuries or harm that were caused while using our product cannot hold J2 responsible for. Please exercise extreme caution when handling our products.

LIMITED LIFETIME WARRANTY